以KMS啟用的server 2012 無法安裝RDP授權
發表於 : 2013-08-16 17:55:39
from http://support.microsoft.com/kb/2859362
Error 800 trying to install RDS Licensing CALs
Symptoms
Attempting to install RDS Licensing CALs on a server 2012 OS, might result in error 800 when you install CALs using the Phone method or the Web method (https://activate.microsoft.com)
Error message:
The RD Licensing Manager received an unrecognized response from the Microsoft Clearinghouse. The site may be experiencing problems or your internet connection may not be functioning properly. Check your Internet connection, and then retry the operation. If the problem persists, try using a different connection method., The requested operation is not supported.
Cause
This issue will occur if the License Server PID is 00184-30000-00001-AT420 The default OS PID is 00184-30000-00001-AA420 for all Windows Server 2012 Standard VL installs using VL media that are KMS client machines. (to see the OS PID look at the properties of My Computer) The License Server PID for Windows Server 2012 uses the OS PID and changes the 17th character to a T, so all KMS client machine will have the same PID.
There have been multiple customers calling with the same License Server PID. The above License Server PID is generated based on the Windows OS key that you enter when you install Windows Server 2012 Standard Volume License media By Default Volume License media uses a GVLK key ( Generic Volume License key), this makes the machine a KMS client machine for the purposes of activation
Read the more information section for details.Read the more information section for details.
Resolution
Uninstall the RDS Licensing role
Rename the LSERVER folder located at C:\WINDOWS\System32 to LSERVER.OLD
Install a MAK key (from an elevated cmd prompt run slmgr /IPK <MAK Key>)
Activate the Windows Server 2012 OS using MAK key (slmgr /ATO)
Install the RDS Licensing role and activate it (Note: You should have a different License Server PID now)
Install the CALs as required.
Back to the top | Give Feedback
More information
When you install RDS Licensing role on a server, you must first activate the License Server in order to install CALs on it. When you activate a License server, there is a PID generated on the License Server which is registered with the clearing house when the License Server gets activated. So for example, if the PID of your License Server is 00184-30000-00001-AT420, when you activated the License Server, this PID got registered with the clearing house as activated.
There is a limit on the Key pack IDs that a registered License Server PID can request. The limit at the clearing house is 4095
Bug being filed that should restrict the activation of the License Server if the Windows OS is not activated.
Back to the top | Give Feedback
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.
Back to the top | Give Feedback
Properties
Article ID: 2859362 - Last Review: June 7, 2013 - Revision: 1.0
Applies to
Windows Server 2012 Datacenter
Windows Server 2012 Standard
Keywords:
KB2859362
Error 800 trying to install RDS Licensing CALs
Symptoms
Attempting to install RDS Licensing CALs on a server 2012 OS, might result in error 800 when you install CALs using the Phone method or the Web method (https://activate.microsoft.com)
Error message:
The RD Licensing Manager received an unrecognized response from the Microsoft Clearinghouse. The site may be experiencing problems or your internet connection may not be functioning properly. Check your Internet connection, and then retry the operation. If the problem persists, try using a different connection method., The requested operation is not supported.
Cause
This issue will occur if the License Server PID is 00184-30000-00001-AT420 The default OS PID is 00184-30000-00001-AA420 for all Windows Server 2012 Standard VL installs using VL media that are KMS client machines. (to see the OS PID look at the properties of My Computer) The License Server PID for Windows Server 2012 uses the OS PID and changes the 17th character to a T, so all KMS client machine will have the same PID.
There have been multiple customers calling with the same License Server PID. The above License Server PID is generated based on the Windows OS key that you enter when you install Windows Server 2012 Standard Volume License media By Default Volume License media uses a GVLK key ( Generic Volume License key), this makes the machine a KMS client machine for the purposes of activation
Read the more information section for details.Read the more information section for details.
Resolution
Uninstall the RDS Licensing role
Rename the LSERVER folder located at C:\WINDOWS\System32 to LSERVER.OLD
Install a MAK key (from an elevated cmd prompt run slmgr /IPK <MAK Key>)
Activate the Windows Server 2012 OS using MAK key (slmgr /ATO)
Install the RDS Licensing role and activate it (Note: You should have a different License Server PID now)
Install the CALs as required.
Back to the top | Give Feedback
More information
When you install RDS Licensing role on a server, you must first activate the License Server in order to install CALs on it. When you activate a License server, there is a PID generated on the License Server which is registered with the clearing house when the License Server gets activated. So for example, if the PID of your License Server is 00184-30000-00001-AT420, when you activated the License Server, this PID got registered with the clearing house as activated.
There is a limit on the Key pack IDs that a registered License Server PID can request. The limit at the clearing house is 4095
Bug being filed that should restrict the activation of the License Server if the Windows OS is not activated.
Back to the top | Give Feedback
Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.
Back to the top | Give Feedback
Properties
Article ID: 2859362 - Last Review: June 7, 2013 - Revision: 1.0
Applies to
Windows Server 2012 Datacenter
Windows Server 2012 Standard
Keywords:
KB2859362