遠端桌面 無法列印
發表於 : 2015-08-05 21:17:31
http://serverfault.com/questions/523862 ... cant-print
I have seen problems like this when moving from win2003 server to win2008 and 2012.
The problem is the print driver, and the new "easy print" system in windows. Some print drivers do not work with easy print.
I should mention that the best solution is to use a "generic" print driver (under mfger "Microsoft") if that can be made to work with your printer.
If you do choose to disable EasyPrint, you will need to install the exact same version of the driver for the printer on the server and on the client. With EasyPrint disabled, RDP printer redirection will try to create a print queue on the server by matching the print driver name for the printer on the client with a printer driver on the server. If the names match exactly, it will create a print queue on the server for the client printer, using that driver.
This kb has the known story (discusses win2008, but also applies to win2012):
http://www.shiprush.com/knowledge_bases ... a-0464.txt
Problem: Nothing prints when using Remote Desktop & local Zebra printer
Scenario:
If ShipRush is running on Windows 2008 or Windows 7, and both:
1) Is accessed via remote desktop and 2) The Zebra printer is attached locally
labels do not print.
Discussion:
This is a known problem with the Microsoft "Easy Print" system. Easy Print is used automatically to handle printing when the host system is Windows 7 or Windows 2008.
Solution:
Use the Group Policy Editor to disable Easy Print:
1) Log out of the remote desktop session
2) On the host. As administrator run gpedit.msc
3) Navigate to: Computer Configuration | Administrative templates | Windows Components | Remote Desktop Services | Remote Desktop Session Host | Printer Redirection
4) Locate the setting: "Use Remote Desktop Easy Print printer driver first"
5) Typically, this setting is "Not Configured"
6) Change this setting to: "Disabled"
Test:
Start a new remote desktop session. Printing to the Zebra printer should now work.
I have seen problems like this when moving from win2003 server to win2008 and 2012.
The problem is the print driver, and the new "easy print" system in windows. Some print drivers do not work with easy print.
I should mention that the best solution is to use a "generic" print driver (under mfger "Microsoft") if that can be made to work with your printer.
If you do choose to disable EasyPrint, you will need to install the exact same version of the driver for the printer on the server and on the client. With EasyPrint disabled, RDP printer redirection will try to create a print queue on the server by matching the print driver name for the printer on the client with a printer driver on the server. If the names match exactly, it will create a print queue on the server for the client printer, using that driver.
This kb has the known story (discusses win2008, but also applies to win2012):
http://www.shiprush.com/knowledge_bases ... a-0464.txt
Problem: Nothing prints when using Remote Desktop & local Zebra printer
Scenario:
If ShipRush is running on Windows 2008 or Windows 7, and both:
1) Is accessed via remote desktop and 2) The Zebra printer is attached locally
labels do not print.
Discussion:
This is a known problem with the Microsoft "Easy Print" system. Easy Print is used automatically to handle printing when the host system is Windows 7 or Windows 2008.
Solution:
Use the Group Policy Editor to disable Easy Print:
1) Log out of the remote desktop session
2) On the host. As administrator run gpedit.msc
3) Navigate to: Computer Configuration | Administrative templates | Windows Components | Remote Desktop Services | Remote Desktop Session Host | Printer Redirection
4) Locate the setting: "Use Remote Desktop Easy Print printer driver first"
5) Typically, this setting is "Not Configured"
6) Change this setting to: "Disabled"
Test:
Start a new remote desktop session. Printing to the Zebra printer should now work.