/etc/rc.local

[yehlu]

https://www.linuxbabe.com/linux-server/ ... th-systemd

How to Enable /etc/rc.local with Systemd

Last Updated: March 26th, 2021 Xiao Guoan (Admin) 26 Comments Linux Server
If you are running a Linux distro that uses Systemd, then you may find that your command in /etc/rc.local file would not run at system boot time. This guide explains how to enable /etc/rc.local script to run on system startup.

Enable /etc/rc.local on Systemd

If you type the following command in terminal:

sudo systemctl status rc-local
You may get this output:

● rc-local.service - /etc/rc.local Compatibility
Loaded: loaded (/lib/systemd/system/rc-local.service; static; vendor preset: enabled)
Active: failed (Result: exit-code) since Thu 2015-11-26 23:54:58 CST; 59s ago
Process: 1001 ExecStart=/etc/rc.local start (code=exited, status=1/FAILURE)
Nov 26 23:54:57 vivid rc.local[1001]: File "/usr/lib/python2.7/dist-packages/pkg_resources/__init__.py", line 920, in require
Nov 26 23:54:57 vivid rc.local[1001]: needed = self.resolve(parse_requirements(requirements))
Nov 26 23:54:57 vivid rc.local[1001]: File "/usr/lib/python2.7/dist-packages/pkg_resources/__init__.py", line 807, in resolve
Nov 26 23:54:57 vivid rc.local[1001]: raise DistributionNotFound(req)
Nov 26 23:54:57 vivid rc.local[1001]: pkg_resources.DistributionNotFound: shadowsocks==2.8.2
Nov 26 23:54:58 vivid sudo[1008]: pam_unix(sudo:session): session closed for user root
Nov 26 23:54:58 vivid systemd[1]: rc-local.service: control process exited, code=exited status=1
Nov 26 23:54:58 vivid systemd[1]: Failed to start /etc/rc.local Compatibility.
Nov 26 23:54:58 vivid systemd[1]: Unit rc-local.service entered failed state.
Nov 26 23:54:58 vivid systemd[1]: rc-local.service failed.
And if you try to enable /etc/rc.local to run on system boot with the command:

sudo systemctl enable rc-local
You may get:

The unit files have no [Install] section. They are not meant to be enabled
using systemctl.
Possible reasons for having this kind of units are:
1) A unit may be statically enabled by being symlinked from another unit's
.wants/ or .requires/ directory.
2) A unit's purpose may be to act as a helper for some other unit which has
a requirement dependency on it.
3) A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, ...).
The solution

As you can see from above, The unit file have no [Install] section. As such Systemd can not enable it. First we need to create a file:

sudo nano /etc/systemd/system/rc-local.service
Then add the following content to it.

[Unit]
Description=/etc/rc.local Compatibility
ConditionPathExists=/etc/rc.local

[Service]
Type=forking
ExecStart=/etc/rc.local start
TimeoutSec=0
StandardOutput=tty
RemainAfterExit=yes
SysVStartPriority=99

[Install]
WantedBy=multi-user.target
Save and close the file. To save a file in Nano text editor, press Ctrl+O, then press Enter to confirm. To exit the file, Press Ctrl+X. Next, run the following command to make sure /etc/rc.local file is executable.

sudo chmod +x /etc/rc.local
Note: Starting with 16.10, Ubuntu doesn’t ship with /etc/rc.local file anymore. You can create the file by executing this command.

printf '%s\n' '#!/bin/bash' 'exit 0' | sudo tee -a /etc/rc.local
Then add execute permission to /etc/rc.local file.

sudo chmod +x /etc/rc.local
After that, enable the service on system boot:

sudo systemctl enable rc-local
Output:

Created symlink from /etc/systemd/system/multi-user.target.wants/rc-local.service to /etc/systemd/system/rc-local.service.
Now start the service and check its status:

sudo systemctl start rc-local.service
sudo systemctl status rc-local.service
Output:

● rc-local.service - /etc/rc.local Compatibility
Loaded: loaded (/etc/systemd/system/rc-local.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2015-11-27 00:32:56 CST; 14min ago
Process: 879 ExecStart=/etc/rc.local start (code=exited, status=0/SUCCESS)
Main PID: 880 (watch)
CGroup: /system.slice/rc-local.service
Cron @reboot

If the above method does not work for you, or you just want some simple commands to be executed on system boot, then you can also use the @reboot feature in cron to automatically execute command on system boot. For example, I want my shadowsocks client to auto start, so I open the root user’s cron file:

sudo crontab -e
And put the following line at the end of it.

@reboot /usr/bin/sslocal -c /etc/shadowsocks.json -d start
Save and close the file.

In some Linux distributions such as archlinux, the cron daemon is not enabled by default. So you have to manually enable it. To enable it on archlinux, enter the following command in the terminal.

sudo systemctl enable cronie
Shadowsocks is a socks5 proxy that can be used to bypass Internet firewalls, If you are interested, click the link below to learn how to setup your own shadowsocks server.

Setup your own shadowsocks server on Debian, Ubuntu and Centos
How to Use Systemd

Want to learn more about systemd to efficiently manage your system? Please read the following tutorial.

How to Use Systemd to Manage Services, Run Levels and Logs on Linux