Serial Monitor
發表於 : 2012-08-29 22:48:28
https://github.com/energia/Energia/wiki/Hardware
(Launchpad board v1.5) If you need to use the hardware UART on say an MSP430G2553, you need to rotate the RX/TX jumpers (Rickta59 on IRC)
需把 TX RX 的JUMP 改為 ＝ （HW UART）
(Launchpad board v1.5) If you need to use the hardware UART on say an MSP430G2553, you need to rotate the RX/TX jumpers (Rickta59 on IRC)
需把 TX RX 的JUMP 改為 ＝ （HW UART）